品牌：RETZ/我們一直致力于流體控制和測控領域的持續創新，始于2005……

(進料閥，出料閥)進口氣動耐磨擺動閥采用雙閥板密封，密封面采用硬質合金摩擦副或增韌陶瓷摩擦副結構，耐磨性強，密封性好，啟動負荷小，閥腔無積灰、無卡塞現象The imported pneumatic wear-resistant swing valve adopts a double valve plate seal, and the sealing surface adopts a hard alloy friction pair or toughened ceramic friction pair structure. It has strong wear resistance, good sealing performance, low starting load, and no dust accumulation or jamming in the valve chamber

進口氣動耐磨擺動閥性能參數 Performance description

采用擺動結構設計，啟動負荷小 Swing structure design is adopted, with small starting load

閥體超大空間設計，不易堵塞，提升物料輸送效率 The valve body is designed with large space, which is not easy to block, and improves the efficiency of material delivery

密封填料采用耐磨耐高溫氟橡膠密封組件，耐溫高達450度 The sealing filler is made of wear-resistant and high temperature resistant fluororubber sealing components, and the temperature resistance is up to 450 degrees

密封面采用耐磨硬質合金材料或耐磨增韌結構陶瓷，硬度可達60~70HRC The sealing surface is made of wear-resistant cemented carbide or wear-resistant toughened structural ceramics, with hardness up to 60~70HRC

密封面采用全陶瓷或全合金覆蓋，耐磨面積提高200-300%，使用壽命提高3-5倍 retz品牌 The sealing surface is covered with all ceramics or all alloys, the wear resistance area is increased by 200-300%, and the service life is increased by 3-5 times

進口氣動耐磨擺動閥技術參數Technical Parameters

公稱壓力（Nominal Pressure）∶1.0MPa

密封試驗（Leakage test pressure）∶1.1MPa

介質溫度（Temperature）∶≤200℃，≤450℃

強度試驗（Maximum test pressure）∶1.5MPa                                                          

DN40-DN300全系列進料閥、出料閥和平衡閥覆蓋 DN40-DN300 full series feed valve, discharge valve and balance valve cover