Tulsion® T-62 MP ISO-9001/ISO-14001/OHSAS-18000
催化劑級強酸型核子級離子交換樹脂用于鋁陽極反應除鋁
Tulsion® T-62 MP 是催化劑級別強酸型陽離子交換樹脂。憑借其大孔的特性，而允許快速反應物擴散到其內部。Tulsion® T-62 MP的大的表面積能夠使大量的催化劑位點參與到催化反應中去。這將有助于催化反應更快更好的運行。它具有優良的機械堅強度，耐磨性和對較高溫度，氧化性，溶劑等的適應性。
Tulsion® T-62 MP 特別適用于用氫離子做催化劑的有機化學反應中，代替H2SO4或者HCl等礦物質酸，以及在酸性條件下去除鋁離子等。
典型特性（TYPICAL CHARACTERISTICS）： Tulsion T-62 MP
型式/Type 大孔強酸性陽離子交換樹脂/Macroporous Strong acid cation exchange resin
主體結構/Matrix structure 聚苯乙烯共聚物/Polystyrene copolymer
官能基/Functional group 核子級磺酸基/Nuclear sulphonic
物理型式/Physical form 球狀/Spherical beads
離子型式/Ionic form 氫/Hydrogen
目數/Screen size mesh 16 – 40 US Mesh
粒徑分布/Particle size 0.42 to 1.2 mm
H+濃度/H+ Ion concentration 4.8 meq/dry gm
濕度/Moisture content 1%
允許溫度/Temperature Stability 130℃
操作條件特性（TYPICAL OPERATING ）：Tulsion T-62 MP
樹脂床高度/Resin bed depth 800 mm
最大流速/Maximum service flow 30 m3/hr/m3
逆洗膨脹空間/Backwash expansion space 40 - 75%
逆洗流速/Backwash flow 8 - 10 m3/hr/m3
再生劑/Regenerant HCl/ H2SO4
再生程度/Regenerantion level 50 - 200 g HCl/l，200 - 250 g/l H2SO4
再生劑濃度/Regenerant concentration 5-8% HCl，3-4% H2SO4
再生流速/Regenerant flow rate 3- 5 m3/hr/m3
再生時間/Regenerant time 20- 60 min
沖洗流速/Rinse flow rate：慢/Slow 再生流速/At regeneration flow rate
快/Fast 工作流速
沖洗量/Rinse Volume 3- 5 m3/m3
測試（TESTING）： Tulsion T-62 MP
離子交換樹脂的抽樣和測試是按標準的測試程序，即ASTMD - 2187和IS - 7330，1998.
包裝（PACKING）： Tulsion T-62 MP
|
Super Sack
|
1000 lit
|
Super Sack
|
35 cft
|
|
MS drums
|
180 lit.
|
MS drums
|
7 cft
|
|
HDPE lines Bags
|
25 lit.
|
HDPE lines Bags
|
1 cft
|
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:：