鋼木實驗室家具是指運用鋼構件和木 構件相互組合的方式建造的實驗室家具。這種結構體系比傳統的木結構體系更加堅固耐用，又比現代的純鋼結構更豐富多彩。

 鋼材和木材這兩種材料的組合搭配，為設計師帶來與以往不同的設計語言：鋼材作為極富現代氣息的材料與木材這種容易貼近自然又充滿人情味的材料相互結合，使得運用鋼木結構進行實驗室家具設計建造的構筑物很容易被賦予一種獨有的語意內涵——既具有時代特征又不失親和氣質。

 通過對鋼木結構節點的交接形式進行系統的研究，可以總結歸納鋼構件與木構件在相互組合成構筑物時，構件交接部位可能出現的形式;探尋結合鋼材和木材的特性在節點部位進行細部設計的可能性。下文是一款創美VOLBA鋼木實驗臺的結構。

管制作經EPOXY噴涂處理，連接翼采用2㎜鋼板制作經鍍鋅處理。管套采用PVC射出一次性成形制品，高低調整腳采用M10㎜螺絲(電鍍處理)調整高度不少于10㎜。整體結構為下承式，其特點堅固承重。

表面處理：鋼管、連接桿、連接翼表面EPOXY噴涂處理。

承重：臺面可承重250-400kg.不易變形。

臺面：采用實芯理化板(厚12.7㎜)，顏色為黑色。耐酸堿、抗沖擊、易清洗。

背板、層板：背板采用18㎜三聚氰胺雙貼面中纖板，層板采用18㎜厚三聚氰胺雙貼面中纖板。外圍均以2㎜PVC封邊條封邊。拆卸方便，并有利于管道及電線的安裝和維護。

柜體：側板采用18㎜厚三聚氰胺板，并以2㎜的PVC封邊條封邊。使用PVC封邊條封邊，防水、耐潮。

配件：采用滬產陽立牌三件套膨脹型連接件，使連接更牢固，兄奕牌PVC封邊條、隱藏式一字型PVC拉手;DTC牌定位鉸鏈;DTC牌三節鋼珠消音導軌;陽立牌調整腳。名牌廠家生產的專業配件，從而保證了產品的整體質量，使產品更具牢固穩定性。

門板：采用實驗室專用三聚氰胺雙貼面中纖板，外緣以2㎜厚PVC封邊條封邊防水處理。防水、耐潮

抽屜：底板及背板采用9㎜厚三聚氰胺雙貼面板制作，外緣以1㎜厚封邊條封邊防水處理。

Steel wood laboratory furniture is built by the combination of laboratory furniture refers to the steel and wood components are the way. This kind of structural system is more robust and durable than the traditional wood structure, and it is more colorful than the modern pure steel structure. Steel and wood combination of these two materials, for designers to bring different design languages with the past: steel as a very modern flavor of the material and wood undefined

The materials are easy to get close to nature and full of human material combination, the use of steel and wood structure was built in the laboratory furniture design structures can easily be given a unique meaning -- not only has the characteristics of the times and without losing the affinity of temperament. Through system of steel and wood structure node handover research can be summarized steel and wood in combination into structures, transfer part of the component may appear in the form of; to explore the detail design of the node position according to the characteristics of steel and wood. Below is a beautiful VOLBA steel wood experimental platform structure.

As control by EPOXY spraying, connecting wing made of galvanized steel plate after 2 mm. Socket with PVC injection forming a one-time product, adjust the level of the foot with M10 screws mm (plating) to adjust the height of not less than 10 mm. The whole structure is under the bearing type, which is characterized by strong bearing.

Surface treatment: steel pipe, connecting rod, connecting wing surface EPOXY spraying treatment.

Bearing: the table can be load-bearing 250-400kg. is not easy to deformation.

Table board: using solid physiochemical board (12.7 mm thick), color black. Acid alkali, anti impact, easy to clean.

Back plate, plate: backplane using 18 mm melamine veneer MDF and laminates using 18 mm thick melamine veneer MDF. In 2 mm peripheral edge PVC edge. It is easy to disassemble, and is advantageous to the installation and maintenance of the pipeline and the electric wire.

Cabinet: side using the 18 mm thick melamine plates, and 2 mm PVC edge edge. Using PVC edge banding, waterproof, moisture resistant.

Accessories: the Shanghai made Yang Li card three piece suit expansion type connector and connected more firmly, PVC edge brother David Card, concealed a font PVC handle; DTC brand positioning hinge; DTC card three sections steel ball silencing rails; Yang Li card to adjust a foot. Brand-name manufacturers of professional accessories, thereby ensuring the overall quality of the product, so that the product more solid stability.

The door: the special laboratory double melamine veneer MDF, 2 mm thick edge to edge PVC edge water treatment. Waterproof, moisture resistant

Drawer: bottom and back with 9 mm thick melamine double veneer production, to 1 mm thick edge edge edge waterproof processing.