進口蒸發循環泵
進口強制循環泵｜進口冷卻水循環泵｜進口軸流式循環泵
進口蒸發循環泵特點：
1、慢速型：泵運轉平穩；過流件磨損輕、壽命長；晶體破損度低，適合于蒸發結晶工藝。
2、懸臂式轉子：與雙支撐式相比，軸封數量減半，泵重量輕、外形尺寸小，檢修方便。
3、泵體中心支撐：與泵體底腳支撐式相比，轉子熱對中性好。
4、后開門結構：不拆泵體進出口法蘭，即可抽出轉子，檢修方便、迅速。
5、蒸發器無膨脹節：可供彈性泵底座或懸掛式泵，熱補償可靠，減少蒸發器投資。
進口蒸發循環泵技術參數：
流量：300-12000m3/h 揚程：2-5m 口徑：25-1000mm
轉速：380-980r/min 功率：4-200kw 工作壓力：1MPa 工作溫度：≤170℃
注：用戶應提供詳細的數據表，根據要求的流量、揚程、介質特性，推薦合理的泵
進口蒸發循環泵的安裝方式：
取決于蒸發工序和結晶工序設備的布置，以下安裝圖表中僅列出各種型號循環泵中配一種電機的尺寸，根據用戶所需的流量、揚程、轉速和介質的比重，我廠將配用不同的電機，安裝尺寸將有局部變動（泵部分尺寸不變），本廠將針對具體工程項目提供正式的循環泵安裝尺寸圖。
1、 直聯型
循環泵與電機通過撓性聯軸器直聯，安裝在公用底座上。
2、 皮帶傳動型
循環泵和電動機用三角皮帶傳動，易于調節泵的性能參數。
3、 彈性泵底座
在公用地坐下方設置可調負荷式彈簧盒，可用直聯型和皮帶傳動型。
進口蒸發循環泵工作原理：
蒸發循環泵輸送液體不是依靠葉輪對液體的離心力，而是利用旋轉葉輪葉片的推力使被輸送的液體沿泵軸方向流動。當泵軸由電動機帶動旋轉后，由于葉片與泵軸軸線有一定的螺旋角，所以對液體產生推力(或叫升力)，將液體推出從而沿排出管排出。當液體被推出后，原來位置便形成局部真空，外面的液體在大氣壓的作用下，將沿進口管被吸入葉輪中。只要葉輪不斷旋轉，泵便能不斷地吸入和排出液體。
進口蒸發循環泵應用領域：
磷肥廠、拜爾法氧化鋁廠、隔膜法燒堿廠、芒硝廠、濕法冶金廠、聯堿廠、純堿廠、輕工行業、電廠、造紙場
進口蒸發循環泵德國巴赫BACH售后服務：
用戶第一，信譽第一，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。
選擇德國巴赫的四大理由：
1：進步性 持續性
回顧巴赫在中國的快速進步性 每年均高速增長，可預見一家大型的生產銷售企業的建立與發展，也必將在中國的閥門市場乃至機械行業的有所建樹。
2：可靠性
德國巴赫的可靠性與產品之性能是公司經營理念重要組成部分。如期發貨，持續經營，高質量， 均經過嚴格的全面測驗。 這就是巴赫為何能高速發展，并且能提供越來越好的高質量產品，最優質服務的原因。
3： 價格
現代化工廠高端自動化數控生產線確保閥門與其配件價格合理，品質優良。
和持續不斷地投資于人力，設備廠房，為用戶提供性價格比高，品質優良的閥門。
4：客戶價值觀
通過集中采購 可以降低總體的采購成本。
便捷的采購，有助于客戶優化配置人力資源，達到精簡高效。
借助巴赫充足的庫存最小化客戶的庫存投入。
高品質的閥門將幫助避免因偽劣產品而導致的停產 停工 誤工。
Inlet evaporator circulating pump
Characteristics of imported evaporative circulating pump:
1. Slow type: the pump runs smoothly; Wear light, long life; The crystal damage is low, suitable for evaporation crystallization process.
2. Cantilever rotor: with double support, the number of axle seals is halved, the pump is light, the shape is small, and the maintenance is convenient.
3. Pump center support: the rotor heat is better than the pump body base support type.
4. Rear door structure: no open pump body inlet and outlet flange, can draw the rotor, easy to overhaul, quick.
5. Evaporator free expansion joints: can be used for flexible pump base or suspension pump, heat compensation is reliable, and reduce evaporator investment.
Technical parameters of imported evaporative circulating pump:
Flow: 300-12000m3 / h head: 2-5m diameter: 25-1000mm
Speed: 380-980 r/min power: 4-200 - kw work stress: 1 mpa working temperature: 170 ℃ or less
Note: the user should provide detailed data table, according to the requirement of flow, lift, medium characteristics, recommend reasonable pump
Installation of imported evaporative circulating pump:
Depends on the evaporation process and crystallization process equipment layout, installation in the chart below lists various type of circulating pump with only one kind of the size of the motor, according to user needs to flow, lift, speed, and the proportion of medium, our factory will be different motor, installation dimensions will have local changes (pump parts size remains the same), our factory will provide formal circulation pump for specific project installation size chart.
1. Direct contact type
The circulating pump and motor are directly connected by flexible coupling and installed on the common base.
2. Belt transmission type
The circular pump and motor are driven by triangle belt, which is easy to adjust the performance parameters of the pump.
3. Elastic pump base
Set adjustable load type spring box on the utility floor, which can be directly connected and belt driven.
Principle of imported evaporative circulating pump:
The evaporating circulating pump does not depend on the centrifugal force of the impeller to the liquid, but the thrust of the rotating impeller blades makes the transported liquid flow along the axial direction of the pump. When the pump shaft is driven by the motor, it produces a push (or lift) to the liquid, resulting in a push (or lift) of the liquid, resulting in the ejection of the liquid. When the liquid is released, the original position forms a partial vacuum. The liquid outside will be sucked into the impeller through the inlet tube under atmospheric pressure. As long as the impeller keeps spinning, the pump can continuously inhale and expel the liquid.
Application of imported evaporative circulating pump:
Phosphate fertilizer plant, bayer oxidation aluminum plant, diaphragm caustic soda plant, mir-nitrate factory, wet metallurgical plant, alkali factory, pure alkali factory, light industry, power plant, paper making field
German BACH BACH after sales service:
The user first, credit first, high quality, perfect after-sales service is an extension of the value of our products and the important guarantee for the interests of the customer, my company's service tenet is: quality management system to establish and constantly improve the scientific, reasonable and efficient service quality management system, fair, accurate and timely complete customer after-sales service quality assurance work, for my company's customer service build good, comprehensive, full service system.
Four big reasons to choose Bach in Germany:
1: progressive sustainability
Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.
2. Reliability
The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.
3: price
Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.
And continuous investment in manpower, equipment plant, providing customers with high quality and high quality valves.
4: customer values
Centralized procurement reduces overall procurement costs.
Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.
Minimize customer inventory by using Bach's ample inventory.
High quality valves will help to avoid downtime due to shoddy products.